Equipments

   

Original Prusa i3 MK3S+ 3D printer
(Original Prusa 3D printers directly from Josef Prusa)
https://eertis.eu/ereq-2400-011f-4901

Technical Parameters
Build Volume: 25×21×21 cm (9.84"×8.3"×8.3") / Layer height: 0.05 - 0.35 mm
Nozzle: 0.4mm default, wide range of other diameters/nozzles supported / Filament diameter: 1.75 mm
Supported materials: Wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, PVB, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Carbon filled, Woodfill and other filled materials.
Max travel speed: 200+ mm/s
Max nozzle temperature: 300 °C / 572 °F
Max heatbed temperature: 120 °C / 248 °F
Extruder: Direct Drive, Bondtech gears, V6 hotend
Print surface: Removable magnetic steel sheets(*) with different surface finishes, heatbed with cold corners compensation
Printer dimensions (without spool): 7 kg, 500×550×400 mm; 19.6×21.6×15.7 in (X×Y×Z)
Power consumption: PLA settings: 80W / ABS settings: 120W
* Consumable parts, such as print sheets (smooth, textured, etc.), are not covered by the warranty since their coatings are expected to deteriorate over time, unless the failure is due to a defect in materials or workmanship. Cosmetic damage, which includes, but is not limited to, scratches, dents, cracks, or other aesthetic damage, is also not covered. Only sheets defective upon delivery are covered by the warranty.


Operation and maintenance: dr. Adrian Bele, Laboratory 6. Inorganic Polymers (Lab. 6 – Head of department, dr. Maria Cazacu), bele.adrian@iampp.ro, 0721175723.


EN - RO



Project leader: Dr. Adrian Bele